Announcement

Collapse
No announcement yet.

CC 550SP spring lever broken

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • J-Mech
    replied
    Welcome to ECC Rauf!

    I see you asked your question over in the walk behind equipment section, I will take a look at what you have and see if I can help you out!

    Leave a comment:


  • Rauf
    started a topic CC 550SP spring lever broken

    CC 550SP spring lever broken

    Good morning. I'm new here and from mid Missouri. I just got a Cub Cadet self propelled mower due to my knees going bad. I have a riding mower, but I need the exercise and enjoy being outside. My problem is, the height adjust lever is broken off. I looked it up before purchasing and it's a relatively cheap part. But, I can't figure out how to get the drive gear off to get to the lever. I know there must be a trick to it, but I can't find a way to keep it from spinning. It has a single T25 torx holding it on. The drive shaft has a sleeve on it, so I can't hold it there. Has anyone else been through this? Any help would be greatly appreciated. Model number is 12A-18M7010.
Working...
X