Announcement

Collapse
No announcement yet.

1810 pto

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1810 pto

    I've got an 1810 cub cadet, the power take off won't stay engaged, I've changed the pto switch, swapped out the relay and bypassed the seat switch and the reverse switch. It only stays engaged in the start position, once it goes to run position it stops, wondering what else I should look for, then I can normal everything up again. Thanks

    #2
    Hello!
    I need to pull the wiring diagram to help you, but I've been busy. I'm guessing you have a bad wire running between the PTO relay and the two safety switches. That or a power problem in the jumper wire at the relay. Do you have a wiring diagram? It is in the service manual. You can download a copy of the manual here.
    ~Jonathan
    Oblong, Illinois

    Just because it's old, doesn't mean it's obsolete!

    I've got a lot of Cubs in the barn....but I have more implements/attachments!

    Comment


      #3
      Any luck Charlie?
      ~Jonathan
      Oblong, Illinois

      Just because it's old, doesn't mean it's obsolete!

      I've got a lot of Cubs in the barn....but I have more implements/attachments!

      Comment

      Working...
      X